Iwata Studio Series Power Jet Pro compressor

£399.00 inc. Vat

SKU: SYL-809


Iwata Studio Series compressors are powerful, compact and quiet.
With oil-less piston motors, they are low maintenance and affordably priced.
The Iwata Studio Series are the perfect companion to any of the Iwata airbrushes.
The Power Jet Pro is twice as powerful as a Sprint Jet, so you can run two fine airbrushes or one high-flow airbrush or a small low-volume spray gun at low pressure.
It has dual air regulators and gauges for setting the pressure for each airbrush independently.
The Power Jet Pro has a 2 litre tank reservoir, which increases moisture separation and smoothes out the air flow.
This type of machine is preferred when heavy use is expected or higher pressures required.
The Power Jet Pro features: • Low maintenance, oil-less twin piston air compressor • Quiet running 1/6 Hp induction motor • 2 litre storage tank • Air flow at 0 psi: 0.
88 CFM (25 lpm) • Working pressure from 0 psi to 60 psi • Dual moisture filters • Dual mounted pressure gauges • Dual air regulators for precise pressure adjustment • Dual quick disconnect ports (2 x 1/4 BSP outlets with 2 x 1/4 BSP quick releases) • Dual airbrush holders • Smart Technology automatic switching reduces running time and motor wear (55 psi on / 75 psi off) • Protective outer case • Comes with two 3m (10′) coiled vinyl hoses • On/off switch • Size: H 33 x W 18 x H 30 cm (approx including handle and fittings) • Weight: 11.
9kg • Voltage: 220-240V 50Hz • Noise level: 52 decibels • Duty cycle: 60 minutes use.
Please allow the motor to rest for at least 20 minutes after each cycle of use.
The Power Jet Pro is suitable for running two of the following or other similar fine airbrushes concurrently: • Neo for Iwata • Iwata Revolution • Iwata Eclipse (except G3, G5, G6) • Iwata HP • Iwata HP-Plus • Iwata Hi-Line • Iwata Custom Micron • Iwata Kustom series The Power Jet Pro is suitable for running one of the following airbrushes, small spray guns or similar: • Iwata Eclipse G3 • Iwata Eclipse G5 • Iwata Eclipse G6 (not fan pattern) • Iwata RG-3 (up to 0.
6mm nozzle and at low pressure for tanning only) • Iwata LPH-50 (up to 0.
6mm nozzle, not fan pattern and at low pressure for tanning only) If you require further advice on choosing the most suitable equipment for you needs and budget, or if you have any doubt about the compatibility between equipment you are buying and equipment you already own, then please contact us.